NewB2dsm
20+ Year Contributor
- 910
- 4
- Jun 25, 2002
-
St. Louis,
Missouri
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
READ ME! To get the numbers found on a typical mustang dyno you have to correct this number which is multiplying it, by 1.17 So 232x1.17 =272awhp This was made on pump gas, 20psi (dropping off as you can see in the charts) with crappy tunning (way rich on the top end). I was just going to lean it out some so the car would run better than what it was before i got my fmic. These were made on a supra sidemount with some geto riged intercooler piping as well. Im not sure why the boost was dropping off, i have a few ideas though but oh well.
So what you think 272awhp from a small 16g on pump with crappy ic piping and no fmic.
I will be going back in a few weeks to finalize tuning and get some new numbers with my new 2.5" ic piping and fmic.
I was hoping to at least 350whp when i get my TDO5H 18G with a 255lph and 650cc and all supporting mods on pump gas. Of course im gonna let RRE tune my car so i should see some good numbers
:thumbdown