The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Big16G: 6cm vs. 7cm housing ... other performance issues

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dan2

20+ Year Contributor
72
0
Oct 6, 2002
California
I've had a Big16G for about a year now, and I am still somewhat unimpressed with the track performance I am getting. The thing feels so fast compared to just about any car I've been in (even an 11 second Porsche and a low 12 second Z06), but the times just don't add up...

With my stock 14b, a 3" cat, 15 PSI, on a hot night I ran a [email protected]. Recently, with my Big16G, test-pipe, injectors, MAF-T, intake, 20 PSI and some race gas I ran a measley [email protected]. Granted that's nearly a 5 MPH increase but I expected that from the other mods alone without the turbo upgrade and boost increase. Both of these runs were made with stock IC except upper IC pipe, 3" downpipe and catback. I imagine if I got more runs in I could get it down to a high 12 @105 or so, but I want more.

The track conditions were horrible (stock LS1s were running ~14.0@100 or so and I was faster than every DSM there) but still -- it's not fast enough.

Other than the stock IC, I think the other big thing slowing me down is the fact I'm running a 6cm turbo housing. The compression looks good and there are no exhaust or boost leaks. No weird datalogs, everything checks out, runs a tiny bit rich but nothing to worry about.

Should I look around for a 7cm housing or will I not even notice the difference? Any other suggestions?
 
Yes you will notice a difference on top and hp output.

If the stock LS1's were pulling 100mph and you were pulling 102mph, that's a pretty good sign considering they trap 106-108mph stock.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top