Oil return line doesnt match to my FR Green turbo WTF

[Bigwilly6754]

I installed turbo today or tired to , so im under the car going to install the oil return line and it doesnt match online one bolt goes in the other is to low .. is there something im supposed to buy to make it match?? Help me please!!!

 

[Mistaspakles]

Are you using your stock oil return line? I don't think you can reuse the stock one. You can get a SS oil return line from RRE or Turbotrix that will fit the Green for sure. I got mine from Turbotrix.

 

[GSXTCY]

I had the same problem the other night with my "bolt on" PTE 56 trim. The oil return line would not match up. Called RRE, nothing. Had to call AGP and they over nighted the return line. $50.00 return line plus shipping. Try them. They have it. Good luck!

 

[Violater101]

And you will also have to use a 1g oil feed line. The 2g can be made to work, but its not a bolt on affair like the 1g is....the 2g must be hacked some.

 

[Ben K]

You have all the right parts. Your positioning of the center housing is off a little. Loosen the 10mm nut on the band clamp and you'll be able to rotate the center housing to line up with the drain line. I just want to make certain that you are using a 1G drain line for a M/T car.

 

[Bigwilly6754]

I got a 97 GSX but im using the stock return line i got a SS for the feed line!!

 

[Violater101]

Originally posted by Bigwilly6754
I got a 97 GSX but im using the stock return line i got a SS for the feed line!!

Like I said, the stock return line will work, but you have to hack it. Go to RRE's site and I believe they show how this is done. I just went with a 1g return line with my Green and it works fine.