Any good or bad reviews on TiAL bov?

[Kizmetturbodsm]

Any good or bad reviews on TiAL bov?

I used the search button on both dsmtalk and dsmtuners and I can never find a decent review on the TiAL bov. The people that run this bov says its "The Best to BOV"(no offense) but then again some people who own The RFL consider that the best bov =\ So I'm looking for honest opinions out there on this bov not the " Oh i own this bov so its the best kind of thing" no offense intended or anything. Thanks in advance!

 

[gritsak]

Originally posted by Kizmetturbodsm
Any good or bad reviews on TiAL bov?

I used the search button on both dsmtalk and dsmtuners and I can never find a decent review on the TiAL bov. The people that run this bov says its "The Best to BOV"(no offense) but then again some people who own The RFL consider that the best bov =\ So I'm looking for honest opinions out there on this bov not the " Oh i own this bov so its the best kind of thing" no offense intended or anything. Thanks in advance!

from what ive heard its a great performing bov, but its just not as loud as some of the others...so if you arent worried about hearing it from 2 blocks away it would be a good choice.

 

[Violater101]

I don't believe it can be vented back to the intake also, otherwise I would say its a really good bov.

 

[alex99gst]

www.dsmreviews.com/dsmreviews.php3

 

[gritsak]

Originally posted by alex99gst
www.dsmreviews.com/dsmreviews.php3

theres no reviews for a tial bov on there

 

[GSX4LIFE]

I recently satrted using it, after installing the MAFT in a blow through setup. The Tial does EXACTLY what a BOV should. it is super quick responding, and holds boost. I have heard people running 35psi with it. This is my 5th BOV/CBV, and the best by far. The only other one that even compared was the 1st Gen valve. But it didnt hold boost past about 20psi for me. The Tial has taken care of that annoying part throttle surge, associated wiht many valves. it even opens under the slightest boost, with no flutter at all. The cars drivability has increased 100% with it and the MAFT installed.

 

[NDgsx]

I have two friends running them. If you don't have a mas I really recomend this valve. Like GSX4LIFE said it does exactly what it's supposed to. A lot of BOVs leak above 25psi or have problems releasing pressure at low boost, the tial does neither. It also sounds good to boot

 

[R Squared]

GSX4LIFE-Can you post pics of your setup (maybe you have them posted somewhere else?) with the blowthrough and BOV? Sorry to horror the thread...

 

[candela]

I have seen tial's hold 42psi. Tials (if not venting) are the best do to 3 main reasons. One the operation is VERY fast, Two the diaphram/valve/flapper is the largest of any I know of and Three, it isnt loud and annoying...

 

[RocketBoy]

How big is it?

 

[Kizmetturbodsm]

First question is whats a MAFT?!

second question is

"I have two friends running them. If you don't have a mas I really recomend this valve. Like GSX4LIFE said it does exactly what it's supposed to. A lot of BOVs leak above 25psi or have problems releasing pressure at low boost, the tial does neither. It also sounds good to boot "

I have a MAS. So does this mean i shouldn't be running this valve??

 

[hostile]

I heard the tial BOV will work even if your running the regular mas. You might try calling the guys at prostreet online they sell it in their kit and haven't had problems with it non recurculated.

 

[rdrkt]

Originally posted by Kizmetturbodsm
I have a MAS. So does this mean i shouldn't be running this valve??

If you have a MAS you shouldn't be running ANY BOV that vents to the atmosphere.

 

[rdrkt]

Originally posted by hostile
I heard the tial BOV will work even if your running the regular mas. You might try calling the guys at prostreet online they sell it in their kit and haven't had problems with it non recurculated.

I guess it would depend on their defintion of problem. It doesnt work right venting with a MAS end of story.