Just got my 16g, what next.

[mitsugsx95]

I just picked up a small 16g today for a good price. I have the RRE install kit and plan on porting it out to match my manny (7cm). I still have the stock fuel system and stock IC. I was wondering what is a safe boost to run with this setup for now and does it matter how long the hose is on the water lines?

 

[echo]

i would stay at 12-13 psi until you get some fuel mods (fuel management/injectors/pump).

 

[Boosted98gsx]

Just a question, why'd you decide to go with the small 16g?

 

[mitsugsx95]

Well, i bought it used off someone my friend knew. Got it real cheap. Plus, anything is better than the t-25. One more question, i got the RRE install kit, but the LICP that connects to the turbo is bigger than the compresor housing flange. Should i port the inlet or just leave it?

 

[Boosted98gsx]

You're only going to flow as much as your smallest diameter will allow you...

 

[candela]

wrong...

Yes you should just leave the comp housing inlet and outlet the way they are... RUn 15psi you shoudl be fine

 

[mitsugsx95]

I think im gonna run it at 13psi at the start to see how things go, and im not going to worry about the ic piping not matching.

 

[SDSGSX]

so on stock fuel system even NO rewire he can run 13 psi?

 

[RipperXX]

Originally posted by Boosted98gsx
Just a question, why'd you decide to go with the small 16g?

Probly same reasion I want it... it spolls up fast as the stock one but can put out a stedy 20+psi rateing..

but i wouldn't go over 15psi untill I got some form of alternet fuel system and better pipeing.. the stock IC system has rubber hoses in some parts of it and you know that kills the flow...