big parts list install need help!

[turbotalon02]

ok im about to put in a greddy profec-b and i would liek to know where i need to go through the firewall b4 ripping everything out. also tell me what else i should buy to run the turbo i am putting on.....20g eliminator, act 2600 clutch, greddy profec b, boost gauge, fuel pressure reg, 255lph fuel pump, 550cc injectors, turbo-xs type h bov....am i missing any thing? A/F gauge? EGT gauge do i need to have those? or is there anything else i need and am i going with a good setup..please respond asap i am putting this on this week...just need help with install instructions for boost gauge, profec-b......one more thing i bought the turbo xs type h bov with the flang and i dont see how it goes on because on my stock 95 bov i mount in between the intake pipe and upic pipe and this turbo xs looks like it only has one hole to mount?

 

[doug]

Yes, you need an EGT gauge. I don't think tuning your car with a logger alone will be good enough (I didn't see a logger mentioned either, come to think of it). You also need some sort of fuel management, such as a S-AFC.

The TurboXS Type H is designed to be vented to atmosphere, so you'll either have to plug your intake (and deal with possible rough/rich engine) or exchange it for a Type H34. You'd be better off getting an aftermarket UICP if you don't have one-- I recommend the Dejon Tool one, which you can get with the TurboXS flange already on it.

Boost gauge install instructions are available at the VFAQ site, as well as here.