AEM Wideband install help!

[phillabaum03]

So im in the middle of installing my AEM uego wideband, and the 4 wire connector that connects from the back on the gauge to power/ground/etc. where do the other two wires connect to?Theirs a white and a blue. I do not yet have DSM link but might soon. Its a 95gst. Anyone got a pic? if not some good directions? thanks guys

 

[Auto RS T]

White and blue aren't hooked up in your case. Just put some heat shrink over the ends for now.

Red- 12v power
Black- Ground
White-0-5 volt output
Blue- Serial output

 

[phillabaum03]

thanks a lot

 

[greathuskie]

White and blue aren't hooked up in your case. Just put some heat shrink over the ends for now.

Red- 12v power
Black- Ground
White-0-5 volt output
Blue- Serial output

im about to install my AEM, where on the car do i install the white and blue?

blue goes to where the factory ECU rear o2 is right? what about white?

 

[matt98eclipse]

im about to install my AEM, where on the car do i install the white and blue?

blue goes to where the factory ECU rear o2 is right? what about white?

As stated above the white and blue wire are not used in your case. please do not highjack other people's threads. Please use Caps to MODS will get after you for that.

 

[greathuskie]

As stated above the white and blue wire are not used in your case. please do not highjack other people's threads. Please use Caps to MODS will get after you for that.

i shoulda said im using dsmlink, so i wired the white into pin 75. its not hijacking when im bumping a similar topic so i dont hvae to start a new one on the same subject. 6.5 years im still on this site, mods can leave me alone

 

[LandoAWD]

i shoulda said im using dsmlink, so i wired the white into pin 75. its not hijacking when im bumping a similar topic so i dont hvae to start a new one on the same subject. 6.5 years im still on this site, mods can leave me alone

Nah, you're fine. I'd suggest RTFMing and searching, but you're right about the similar topic concept.

 

[greathuskie]

Nah, you're fine. I'd suggest RTFMing and searching, but you're right about the similar topic concept.

i searched probably 5 different topics before posting, its not easy to find where to hook up the stupid specific wire on teh AEM. finally did get it installed, looks sick

 

[matt98eclipse]

Sorry man i didn't mean to sound like a a** and i didnt realize you were running link.