The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Ebay Big 16g

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thricestrat

15+ Year Contributor
66
0
May 17, 2005
North Tonawanda, New York
Trying out the Ebay "16g Kit"....
includes: Big 16g
02 housing
J-pipe
Oil Feed and Return
equal length header (will probably last 1 month LOL)
All Gaskets and hardware (probably wont fit!)

cost: 300+50 shipping

As soon as I bolt it up and turn it over I will post back....

Has anyone tried the "kit" version sold on Ebay? Ive searched and could only find the reviews of the ebay 16g

thanks
 
If you have the same luck as 99.9% of the eBay turbo buyers have had....

-The header will crack in the first 1000 miles.
-The turbo will blow in under 2000 miles.
-The o2 housing flange isn't flat enough to seal against the turbo without leaking.

GOOD LUCK!
 
I just bought an ebay turbo . Im going to know first hand if these are decent or not. Im taking photos of it. I purchased mine from etd motors. If it blows im sending it to this above dude and having it rebuilt or my small 16g rebuilt.
 
be careful with the bolts, they usually are not the correct thread.

You must be logged in to view this image or video.


I run this Housing, it works fine and so do the gaskets.

Let me know about the j pipe, the one i got from sbr is terrible, hardest thing in the world to install
 
Please do NOT be like me... I bought just the "evoIII 16g" off of ebay and got a Korean knock-off turbo. Sure i went 13.0 with it BUT that only lasted for a few months. I strated hearing a BZZZZZZZZZZZ from the turbo under boost, ( the only thing i could describe is was is a buzz saw. ) I took the turbo off removed the compressor cover and the fins were all destroyed - Rubing on the cover internally and sending metal peices into my engine. Not only did this suck because i waisted money on a junk turbo, but my engine was later ruined not to long after... all because i wanted to save a buck :beatentodeath:, TAKE IT FROM ME- STAY AWAY!!!! :notgood:
 
Im so sorry i didnt reply to this post sooner. The turbo is great fit perfect. The only issue i dealt with was the wasgate canister was so stiff it wouldn't open. So i used my lil 16g turbo wasgate canister and it its working great now. No track time yet though im building a newer setup.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
  • For sale 2g Eclipse/Talon Passenger Side Fenders
    95-99 Eclipse/Talon Passenger Side Fenders
    • Sdcryan1
    • Updated:
    • Expires
  • Wanted Driver Side Front Side Skirt End for 97-99
    Looking for the driver side skirt end molding. Bonus if it has the mud/rock guard.
    • ProjectDSM
    • Updated:
    • Expires
  • For sale 1997 Eagle talon esi
    runs and drives located in Oklahoma City
    • Nii
    • Updated:
    • Expires
  • For sale 2 bare 7 bolt motors
    bare 7 bolt bottom ends
    • Nii
    • Updated:
    • Expires
Back
Top