Anyone make their own I/C pipes?

[Faded]

I'm about to make my pipes for my FMIC this weekend and I was curious if anyone has any tips, tricks or advice for me. I figure I will first get the damn thing mounted then figure start the pipe runs from the I/C to the turbo. Then the I/C to TB. I plan to cut the pipes then take it to a shop and get welded together, but wanted to see if there is anything people have learned from experience that I should be aware of since if I make one cut at the wrong angle my project can come to a halt.

Info: 2G GST; Spearco 2-272; 2.5" Mandrel Bends all the way to TB & Turbo; connecting to FP Green.

 

[IPT]

Sounds like a plan. Just get extra of every bend so that if you screw up you have another piece. I made my own piping and made piping for other people. It is not that hard. I only wish I had a TIG welder to make the welds look all nice and pretty.