The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Big28 Killer Times

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Boosted98gsx

20+ Year Contributor
2,099
22
Oct 31, 2002
Houston, Texas
I recently went to the track with the killer sittin happy on my engine. Although, i had a slipping clutch. I put some 112 octane in to mix with my 93 and came out with around 107 for no knock :D. Ok well here's my list of mods so you guys will figure out how bad the clutch was slipping:

Injen Intake
Dejon Tools UICP w/ 1G BOV
3" O2 eliminating (No cat) exhaust
Walbro 255LPH
RC 550CC injectors
DSMlink
Joe P MBC at about 20PSI
Bridgestone Potenza S-03 Pole position tires on stock 17's

I ran twice, but the clutch slipped so badly i just left after the 2nd race and told the timeslip lady to trash the 2nd slip.

Here's the first one:
 

Attachments

You must be registered for see attachments list
Andy play nice :p I appologize CBgst. He's quick to tongue sometimes, but he's really a great guy.

Surprised u havn't let the word slip bout the vette kill? :shhh: I'll let u tell the story and I'll get the vid ready so u can back it up :laugh:
 
Originally posted by Boosted98gsx
Yea well sry bout that. I dont really trust ppl talkin about what i have and sh!t if i dont know them. I've already had one car stolen from me so i'm sry if i came off like an ass.

It's all good:thumb: Maybe when I get another car ( I totaled mine last month) we can meet up at the track some time. I live about 2 hours away but I make it over there quite often.
 
That was uncalled for. Wow, do ppl just like tryin to call bullshit? When i raced the 300zx TT, that was my 2nd run. The clutch wouldn't grip at all through 3rd gear after the launch so i just gave up and coasted down the track. I never said anything to anyone, when they asked what i ran i said "slow" because i was embarrassed, sry. My car wasn't performing to it's best ability so i didn't want to brag about anything. and yes IT WAS THE CLUTCH. You odnt understand how bad it's slipping. I was very lucky to get that vette kill last night with the way it's acting.
 
Just thought I would take the opertunity to tell you guys that it's a good time to own a AWD DSM here in Houston & surounding states/areas ........ ;)
 
Originally posted by Turbo
Just thought I would take the opertunity to tell you guys that it's a good time to own a AWD DSM here in Houston & surounding states/areas ........ ;)

Well I'm working on owning another dsm period right now. My next one will be awd drive though. One more question why is now a good time to own one and are you talking about awd only or a just a dsm. When I get another car hopefully by the end of next month I might be paying you a visit for my next turbo ( the big28 I had was nice but it just wasn't big enough next time around I want really lay the smack down:thumb: ) See ya later.
 
We will have our AWD DynoJet installed in the next month or so .......;)
Thats why I have just bought my second DSM which is a 94 Talon AWD.
 
Yep John you missed the last meet dude. Its called dyno-comp!!!
Its gonna be at the scottsdale airpark:thumb:
 
Originally posted by candela
Yep John you missed the last meet dude. Its called dyno-comp!!!
Its gonna be at the scottsdale airpark:thumb:

F@CKIN AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
What are you doing? Id be down to come by and help... I aint done never been out them there to that there town.... =)
 
I'm not sure really. All I know right now is everything is torn apart including motor mounts. My engine is just sitting there waiting to be yanked out. I also need to take a torch to my frame and notch it out a tad for my ic outlets.

I dunno about the engine, new frontcase. I was thinking about rebuilding the bottom end, but seems like a pain in the arse to me. Maybe just a new front case, clutch, motor mounts, and driver side axle. Oh and FMIC :D I need to figure out how I am gonna route my piping also..

And I need to get my new shiney fart cannon welded on.
Ya you are welcome to come down sometime, when I have a day off. I'll buy you lunch for your troubles :D
And maybe let you drive my car when its running. Now thats an honor I have never let anyone drive my car. NEVER :p

Oh yea timing belt and balance shafts removed too. Fun stuff. :laugh:
Not all in one day of course :cool:


I'll get you a spot on my web server for your car too :shhh:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top