Relocated Battery, what junction block

[Spartan302]

I recently reclocated my battery to the trunk and I have the wire run and all but I couldn't find a decent junction block for under the hood. Those who have done it what junction block did you use, and if you have a link to it. I'd like to keep it hidden well if possible. Thanks.

Here is where my power wire is located under the hood:

You must be logged in to view this image or video.

Here is the battery relocated:

You must be logged in to view this image or video.

 

[karbon]

I used this, only in "platinum" because I used 1/0ga. wire for the power. I mounted mine behind the strut tower as close as I could get it to the strut tower and about level with where the wires that went to the battery go, that way I didn't have to extend the length of any of the wires and there was enough slack so that they could be bolted flush to the side of the engone bay. It turned out looking pretty clean. If you want a picture I can grab one.

 

[Spartan302]

Yeah if you get a chance a pic would be cool. Thanks for the link.