The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Solution To GReddy Type-RS Recirc Problem

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

S Bizzy

15+ Year Contributor
58
0
Jul 19, 2004
Detroit, Michigan
The stock recirc hose WILL fit around the GReddy-RS with a flathead screwdriver to help stretch the hose over the B.O.V. I'm not certian but it may work for a stock intake also..

You must be logged in to view this image or video.
 
the blue outlet screws off with a little bit of force but once you do that there is nothing left to wrap a hose around.
 
i heard that greddy was going to make an adapter for the so that the dump tube was easily connectable... :confused: i really like the new one but i would only buy it if the extra cost was small from selling my type s and if the new adapter came with the rs
 
S Bizzy said:
The stock recirc hose WILL fit around the GReddy-RS with a flathead screwdriver to help stretch the hose over the B.O.V. I'm not certian but it may work for a stock intake also..

You must be logged in to view this image or video.

wouldnt that leak though?
 
Hell no...once you squeeze the stock hose on then it's such a tight fit that it's superhard to get it off. But we used a clamp as extra insurance which we slid all the way to the right of the pic so you could see how the hose looks.
 
S Bizzy said:
Hell no...once you squeeze the stock hose on then it's such a tight fit that it's superhard to get it off. But we used a clamp as extra insurance which we slid all the way to the right of the pic so you could see how the hose looks.

nice... i thought you might be able to do that, but i didnt see how since there is a funny angle for the clamp to clamp to. also, got any sound clips from it? :thumb:
 
No sound clips..I had to take the B.O.V. off cause the flange wount fit on my stock upper intercooler pipe :-(
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
  • For sale 2g Eclipse/Talon Passenger Side Fenders
    95-99 Eclipse/Talon Passenger Side Fenders
    • Sdcryan1
    • Updated:
    • Expires
  • Wanted Driver Side Front Side Skirt End for 97-99
    Looking for the driver side skirt end molding. Bonus if it has the mud/rock guard.
    • ProjectDSM
    • Updated:
    • Expires
  • For sale 1997 Eagle talon esi
    runs and drives located in Oklahoma City
    • Nii
    • Updated:
    • Expires
  • For sale 2 bare 7 bolt motors
    bare 7 bolt bottom ends
    • Nii
    • Updated:
    • Expires
Back
Top