What type of FMIC is this and how do I mount it?

[chowda633]

This is the FMIC I have and I was wondering how to mount it and where to buy the brackets. I did alot of searching but didn't find much.

Thanks,
Josh

 

[definitiveno]

looks ebay

 

[44pirate]

Looks like 1g bracketing.

 

[Thomas91169]

home depot my freind. they have some metal strips with holes in them, you take those and make brackets and stuff with them.

 

[chowda633]

awsome thanks. Yea thats what my main question was how to do the mod with those bracket strips. Just modify the hell out of them?

Thanks,
Josh

 

[c5chris]

It looks a StreetImports FMIC 24"x9"x3 with 2.5" inlet/outlet.

Hang it and buy mandrel bent pipes from Summit Racing or take it to a local muffler shop.

 

[Turbocharged]

I bought a strip of aluminum raw iron from home depot. Its a long peice of aluminum folded at a 90* bend. I cut a 3x3 piece of it and welded it onto the top center of the intercooler. Then I drilled a hole in the aluminum piece and bolted it up to the hood latch support bar (im not sure what else to call it).

 

[Turbocharged]

Make sure you get an aluminum piece, otherwise it cannot be welded to the intercooler.

 

[skinnypimp]

i have to agree with c5chris, looks like a street imports that's what i have on my talon. i'll take a pic of my car to show you how mine is mounted

 

[chowda633]

Awsome thanks,

Yea the main thing was how to mount it. I like that aluminum idea. And the guy I got it from said there made in canada or somthing? Run around 200-250 range? Don't know if that helps any.

Want to do the piping myself to save as much as possible. Looking around for welding options and a cheap way to get some pipe so I don't have to much left over. Went to a shop yesterday and they wanted 300 for everything.

Thanks

 

[Turbocharged]

Awsome thanks,

Yea the main thing was how to mount it. I like that aluminum idea. And the guy I got it from said there made in canada or somthing? Run around 200-250 range? Don't know if that helps any.

Want to do the piping myself to save as much as possible. Looking around for welding options and a cheap way to get some pipe so I don't have to much left over. Went to a shop yesterday and they wanted 300 for everything.

Thanks

Cut your own aluminum flange and take it to a machine shop. The flange cost me $10 for the large aluminum raw iron and the welding (TIG) cost me $5. The first shop wanted $75 for welding which is bull. It only takes 5 minutes to weld something that small.