New Dyno #s

[CursedGSX]

Made a little more power this time on the dyno.

http://www.buzzsmotorsports.com/cursedgsx/

67mm turbo @ 36psi
AEM EMS
Stock ignition
Stock fuel lines/filter/rail
Stock NT Throttle body

 

[anconover]

 

[gixrman]

thats just sick. nice flat power curve from 5.5k to redline. I have a hard time believing thats on the stock feul lines.

 

[anconover]

look at his engine bay pics. you can see the stock fuel lines.

 

[CursedGSX]

thats just sick. nice flat power curve from 5.5k to redline. I have a hard time believing thats on the stock feul lines.

Believe it. I'm running a big bosch pump in-tank with 1600cc injectors.

 

[CanadianTSi]

Amazing.

Just more proff that people are wasting money upgrading there stock lines...

 

[CursedGSX]

Amazing.

Just more proff that people are wasting money upgrading there stock lines...

Yea. I was just as impressed with the 1G stock ignition. I can't believe it can take that kinda power. The site still has a pic with the Accufab throttle body but after breaking 2 of those I ditched them. Stock NT tb seems to be working well for me.

 

[noreaga0221]

Amazing.

Just more proof that people are wasting money upgrading there stock lines...

You can say i'm wasting money but i'd say i'm buying insurance.




Harold, time to update the thread. http://philadelphiadsm.com/forum/viewtopic.php?t=566&highlight=

 

[rhamlinii]

Damn, thats alot of power. Its just goes to show, how you guys know your shit on dsms. Its taken you guys a while to get there but shit, it was worth it. Now Rich has to catch up. I cant wait to see the car in action next year if your tranny holds up( knocking on wood). Congradulations on an awsome dyno run. If you guys keep pushing the limits, your only make people like me feel even slower.

-Cheese-

 

[HighPSI TSi Guy]

very nice... saw the dyno posted last week i think? on brad's post on the AEM board.. heard you had a nice RWD performance at MIR last sunday

now i can say "hey, my old TB is now making over 600whp on it's new owner's car!" haha.. glad it worked out good for ya.. i can't wait to see that car make a clean pass

 

[Scrymerr]

How many liters per hour does that bosch pump flow?

 

[Diplomat]

Did you go 2WD for the dyno or was this on a 4WD dyno?

 

[igopoopy]

where is the mafs

 

[91turboTSi]

Congrats on the dyno results! Now its time to beat Rich and put down some 9 sec passes!!! Good Luck.

 

[DSMTurboEclipse]

Congrats on those awesome numbers.

 

[Stoner]

where is the mafs

He is using a stand alone, and I dont think they require a mas air sensor. Correct me if I am wrong but arent they speed density.

Also props on the dyno pull, that must be one hell of ride with 700 whp. Do you ever drive it on the street?

 

[gixrman]

were are you at in MD? mind if I come by and drool on your car. Do you have a shop?

 

[CanadianTSi]

Does the 1G NT TB bolt up to a 2g like the 1g turbo TB would?

 

[ITSME4G63]

looks like its on a stock suspension

 

[CursedGSX]

You can say i'm wasting money but i'd say i'm buying insurance.




Harold, time to update the thread. http://philadelphiadsm.com/forum/viewtopic.php?t=566&highlight=

Hahaha, will do. Haven't been on the forums in a while, forgot about that.

 

[CursedGSX]

very nice... saw the dyno posted last week i think? on brad's post on the AEM board.. heard you had a nice RWD performance at MIR last sunday

now i can say "hey, my old TB is now making over 600whp on it's new owner's car!" haha.. glad it worked out good for ya.. i can't wait to see that car make a clean pass

. That's YOUR tb? Hahaha. The car went 11.0 @ 140.3 on it's first pass. Nice rolling out 2.0 60'. 105mph to the 1/8th, 140 up top. It was pullin HARD on the top end. On the 2nd pass I launched hard and something let go. I'm pretty sure it's the xfer case as the car seemed to go FWD mid track. It's got a lot of potential.

 

[CursedGSX]

How many liters per hour does that bosch pump flow?

Im not sure on the specs of the bosch pump but using 1600cc injectors and stock lines/filter/rail, the car's IDC was only 51%.

 

[CursedGSX]

Did you go 2WD for the dyno or was this on a 4WD dyno?

This was done on an AWD Dynojet at www.arfabrication.com.

 

[CursedGSX]

Congrats on the dyno results! Now its time to beat Rich and put down some 9 sec passes!!! Good Luck.

Thanks! It's definitely got 9s in it if it'll stay in one piece.

 

[CursedGSX]

He is using a stand alone, and I dont think they require a mas air sensor. Correct me if I am wrong but arent they speed density.

Also props on the dyno pull, that must be one hell of ride with 700 whp. Do you ever drive it on the street?

Correct, I'm using the AEM EMS set up for speed density. The car rarely sees the street anymore. I only take it out sometimes to make sure everything is OK. Yea, it's a wild ride.