The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

GM MAFT question (blow thru set up)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DsMWookie

15+ Year Contributor
360
1
May 3, 2004
Birmingham, Alabama
Ok I just put the GM MAF sensor in right near the throttle body....can I just put a filter on the turbo ?


Also where should i run the line that went to the BOV ?

Last but not least what do I do with the line that went to the valve cover?
 
can I just put a filter on the turbo ?

- You can, It might be a tight fit though. You can just get a 3" intake or and run a filter on the end of it. I made my 3" intake out of bends from lowes.

Also where should i run the line that went to the BOV ?

-Since you have it set up in blow through, You do not need the recirculation hose anymore, If you really want to, You can get an intake with the recirc adapter, or you can make an intake, With a recirc adapter.

Last but not least what do I do with the line that went to the valve cover?

- Just go but a 2$ catch can from any parts store, And put it on the end of the hose.
 
The hose for the BOV i was refering to was the little vacuum hose....



As far as the filter I was thinking one of those HKS mushroom filters just stuck on it.



SO i shouldnt just cap off the one from the valve cover?
 
what bov do you have? the line that goes to the intake manifold? That will stay connected.

You can buy cheaper versions of those mushroom filters for like less then 20dollars at an autoparts store.

i never seen anyone cap that part off on the valve cover. most people just put a catch can on it, i just have mine connected to the hose that came off of the charcoal canister so it wouldent just be dangling there.
 
I had my valve cover vent capped off for awhile before I knew what it really did, and I think it caused some small problems (burning oil at high rpms, probably increased the pressure in the valve cover). I have since run a line from it to a small air filter and haven't noticed any problems since.
 
Yah my buddy had a filter on his 2g (non turbo with HAHN kit on it) and he was smoking alot...he capped that filter off and it stopped the smoking so I guess ill go with a catch can
 
Valve cover:
Get a hose and run it down towards the ground
Put a breather on it

Filter: Do yo want it sucking in that nice warm radiator air?

BOV: Run it from a nipple on the intake mani.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top