Morphius
DSM Wiseman
- 1,895
- 65
- Jun 9, 2003
-
M-Town,
Michigan
Anyone got any info on what the 1.8L cylinder head will flow? Obviously, not as much as the 2.0L. The 1.8L head most closely resembles the head on my diesel for exhaust port size, which I'd see as the limiting factor. My diesel head is a 12v vs a gas 8v, so I'm ahead there.
Ginsu417 apparently is putting down over 250Hp and 236ft-lbs on a 16g at 18psi. So, I believe I can hit that easy, but how much further I don't know.
If you've go any info, please let me know. Any MI natives know a shop that will flow test a head for cheap? I've got a 1.8L gas head sitting around I'd take to get flow tested if the price was right.
Ginsu417 apparently is putting down over 250Hp and 236ft-lbs on a 16g at 18psi. So, I believe I can hit that easy, but how much further I don't know.
If you've go any info, please let me know. Any MI natives know a shop that will flow test a head for cheap? I've got a 1.8L gas head sitting around I'd take to get flow tested if the price was right.
