Trans cooler with FMIC

[95GreenGSX]

Hey, so while I was trying to mount my FMIC I noticed that my trans cooler was in the way. What do you guys do? Do you just get an aftermarket cooler and mount it where the SMIC went?

Thats what Im planning on doing so if there is an easier way, lmk.
Thanks guys.

 

[spooled_u_1st]

I have my external oil cooler and my automatic transmission cooler in between the ac condencer and my fmic.

 

[Defiant]

Are you calling your power steering cooler a transmission cooler? The transmission cooler lives inside the bottom tank of the radiator.

http://www.dsmtuners.com/forums/pro...ring-cooler-merged-7-8-cooling-coil-loop.html

 

[FMFGSX]

I ran my tranny cooler on the passenger side.

 

[95GreenGSX]

Are you calling your power steering cooler a transmission cooler? The transmission cooler lives inside the bottom tank of the radiator.

http://www.dsmtuners.com/forums/pro...ring-cooler-merged-7-8-cooling-coil-loop.html

Nope it's def a tranny cooler. My powersteering cooler lines are fine with the front mount, but the OEM trans cooler seems to be out too far. Looks like I'll be getting one from IPT.

 

[TurboAnything]

I would have just re drilled the holes and moved it up but a upgraded cooler is a better idea.

 

[95GreenGSX]

Its not the holes that is the problem, its the lines, they stick out too far from the car. Im ordering an after market cooler later today