I bought a set of these for my 1g to put in my fog lights. They are awesome but there were a few quirks along the way.
The stock bulbs get held in on the very back by a wire that goes across them. The clips don't touch the base of the bulb like other H3 bulbs mount. Here is what my neighbor and I came up with. We used cable used for lawn mower throttles.
With that out of the way I felt my lenses were horrible. They are almost 20 years old! So I polished them up. I went sanded and went with 600, then 800, then 1000, then 1500, then 2000 grit. Lastly I used Meguair's PlastX to take out the cloudiness left even after sanding.
The one lens was dirty on the inside so I had to pop it off. I broke the adjustor screw trying to pop the screw from the lens. They barely turned anyway and were stripped, and made of plastic. So we used some screwdriver-head bolts, put a slit in them, and used an e-clip to hold them in place, along with new o-rings and some silicone-based grease. Mounting and wiring was non-specific, so I won't really comment on that. It's left to creativity.
Fog lights off:
Fog lights on:
I am very satisfied with this product. I definitely recommend! Shipping was fast!
The stock bulbs get held in on the very back by a wire that goes across them. The clips don't touch the base of the bulb like other H3 bulbs mount. Here is what my neighbor and I came up with. We used cable used for lawn mower throttles.
You must be logged in to view this image or video.
With that out of the way I felt my lenses were horrible. They are almost 20 years old! So I polished them up. I went sanded and went with 600, then 800, then 1000, then 1500, then 2000 grit. Lastly I used Meguair's PlastX to take out the cloudiness left even after sanding.
You must be logged in to view this image or video.
The one lens was dirty on the inside so I had to pop it off. I broke the adjustor screw trying to pop the screw from the lens. They barely turned anyway and were stripped, and made of plastic. So we used some screwdriver-head bolts, put a slit in them, and used an e-clip to hold them in place, along with new o-rings and some silicone-based grease. Mounting and wiring was non-specific, so I won't really comment on that. It's left to creativity.
Fog lights off:
You must be logged in to view this image or video.
Fog lights on:
You must be logged in to view this image or video.
I am very satisfied with this product. I definitely recommend! Shipping was fast!
