The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Wiper Arm Question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Flash

20+ Year Contributor
3,359
14
Nov 30, 2003
Highlands Ranch, Colorado
Well, my car's wiper arm's are starting to look well... not like new. How do I take them off? I heard they pull straight out, I just want to check before I go break something. So do they pull straight out? If not, how do they come out?
 
you are correct - remove the 10mm bolt under the plastic cover and pull straight off.
 
Is your plan to repaint them? If so, you can leave them on. Take the wiper blade off. Get some newspapers and poke the wiper arm through it. Lay the wiper arm back down with the newspaper under it and spray away. The newspaper will keep the paint off the glass and cowl.
 
AWDPetmitsus' method would work well if you were brushing the paint on. Unless you cover the entire car, you will get all sorts of overspray.

Take the arm off and do it right. If you take it off you can also get to all the spots that you wouldn't be able to if it was left on.
 
Meguiar's used to make this stuff called "Back to Black" that I used on my wipers and window trim. If they still make it, stock up. Leave the wipers on the car, dab a bit on a rag (dont use a fluffy towel, the lint will stick horribly) and wipe on.

:dsm:
 
Omega said:
Isn't the back to black for vynal/plastic parts?


Supposedly, but it works better on wipers than spray paint. Just has to be reapplied like twice a year or so.

:dsm:
 
wastefuldreamer said:
1 bolt, Take it off and pull, Then spray paint the arms. Its not that hard.


You forgot "wd-40 the rusty ass bolt, get bitched at by wife for painting the sidewalk, and buy paint thinner to get wind-blown overspray off hands." Just trying to help. :D
 
Randomrage said:
You forgot "wd-40 the rusty ass bolt, get bitched at by wife for painting the sidewalk, and buy paint thinner to get wind-blown overspray off hands." Just trying to help. :D
i guess some of us have more than DSM in common :p
 
Well I couldn't get the wipers off so I covered half my car with newspaper, and built a mini paintbooth around each wiper with carboard. Now, there is no over spray and my wipers look like new!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top