The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Replacing OEM door Pumps with Aftermarket pumps

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

civic619

20+ Year Contributor
150
1
Feb 17, 2003
My factory Door pumps are gone and need to be replaced. Rather than spending $150 for a new pump ($300 for both doors) Id rather pick up some aftermarket pumps for $20 each.

My delima is the wiring. I noticed that the OEM pump use a 4 wire type pump. If I were to go with a 2 wire aftermarket pump, how would I go about and install it? Which wires would I use out of the four?

Any Advice?
 
civic619 said:
My factory Door pumps are gone and need to be replaced. Rather than spending $150 for a new pump ($300 for both doors) Id rather pick up some aftermarket pumps for $20 each.

My delima is the wiring. I noticed that the OEM pump use a 4 wire type pump. If I were to go with a 2 wire aftermarket pump, how would I go about and install it? Which wires would I use out of the four?

Any Advice?
What exactly is a door pump?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top