1996Eclipse420a
10+ Year Contributor
- 162
- 1
- Jan 12, 2012
-
Wilkesboro,
North Carolina
I got my motor back from the machine shop yesterday. I took a few pics so I'll post them up. Here's the work I had done to the block, head, crank, etc..
-Valve Job
-Head Cleaning
-Shaved Head
-Block Bored and Hone .020
-Block Decked
-Crank Turned
-Grind the crank (due to 3 spun rod bearings)
-Polished Crank
-Balanced the crank with the new pistons/rods
All this was done for $485. Not bad, I don't think! Also, the rod/main bearings are only 25mm (.010) over sized.
She's ready to be put together, just waiting on the gaskets and bearings to arrive.
-Valve Job
-Head Cleaning
-Shaved Head
-Block Bored and Hone .020
-Block Decked
-Crank Turned
-Grind the crank (due to 3 spun rod bearings)
-Polished Crank
-Balanced the crank with the new pistons/rods
All this was done for $485. Not bad, I don't think! Also, the rod/main bearings are only 25mm (.010) over sized.
She's ready to be put together, just waiting on the gaskets and bearings to arrive.
