16g oil lines and water lines locations

[alex09]

I know that the oil line goes off the 16g turbo to the oil pan but I was wondering where the second oil line goes, will and where will it tap into, the oil line or is it the oil pump. I am asking this because I am turboin my 420a engine and my buddy told me I need two oil lines. Also hahn offers a feed and return kit that comes with one oil line and a dump tube, is that good and is there cheaper kits other than Hahns which is going for $99.00?. Also since the 16g is a mitsubishi turbo I was wondering where the water lines go, I know one water line goes from the turbo to the water pump but where does the second water line come from and go to? Please help me or email me at [email protected]ks

 

[selmerguy]

the oil feed line can be tapped right behind the block on the 420a. you will see oil lines there. as far as water lines you can tap your radiator hoses

 

[siueclipse]

you really dont need water lines for a 16g turbo. some people hook them up bu 90% of people don't. i haven't hooked mine up. there isn't much need.

 

[selmerguy]

i dont think you need them either. however our motors like to run hot so the cooler the better.

 

[2fast420a]

i dont think you need them either. however our motors like to run hot so the cooler the better.

As long as you have proper oil cooling your fine without water. Just make sure to allow the turbo sufficient cooling time after heavy use.