The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Help build a 420a custom turbo kit

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

eclipsegs2gst

Probationary Member
17
0
Oct 21, 2008
Denmark, Wisconsin
Ok so i need help building a full 420a turbo kit as low price as i can, if you could time me the peace it is the price and where to buy it or just tell me your whole kit and how you made it if it was lower than $1500. the kit should have a fuel pump not injectors all the way to the electrics and turbo.

Thank you for reading and your help.:)
 
255 HP fuel pump:$95
EXTREME PSI : Your #1 Source for In Stock Performance Parts - Walbro 255 HP with Install Kit: Mitsubishi Eclipse 95-99

12:1 FMU: $182 or $120 from me (I use portfueler)
Vortech Engineering: FMU, 12:1, 1/4" Barb Fittings

Turbo kit: $1930
420a Turbo kit 95-99 Eclipse Talon - TREADSTONE PERFORMANCE

Since you're a '99 you're going to need an FCD, I think Pual still makes them for $40.

Total: $2127-$2247 (not bad for a good quality/reliable kit pushing 8-9 PSI of boost).

Edit: BTW, you're post is hard to read, you need to make sure you do not leave out any words and spell everything out correctly.

I think someone should sticky this so we don't have this question come up every other week.
 
OP: If you search you will fine that this has been disscused about 5 times in the last week.

The as low as you can price isn't always the best idea.
I will use Mike's quote yet agian. "Do it right, or do it twice".
Some parts are fine to get on ebay and others not so fine.

I would say start with looking at what Shadow said. From there you will get a good idea of what you will need. Then you can look around and decide which parts you want and what it the cheapest but most reliable way to go.

I think someone should sticky this so we don't have this question come up every other week.

Aaron, if you see this you should add your price list.
And I agree with Shadow on the sticky. (It's been like every other day this week.)
 
I'm sure I can find cheaper, but I don't know what the quality of the parts would be or if OP (or any one trying to do this can fabricate). I got a meeting to go to (i'm at work), i'll post a cheaper option when I get back.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top