The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Boost Leak Found!!!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Patterson

15+ Year Contributor
136
3
Apr 6, 2005
Harrisburg, Pennsylvania
:dsm: Hey guys,
I just performed a boost leak test on my car and I would like some of your expertise. I pressurized the system with a bike pump and I noticed that I could barely push my pressure gauge past 1 psi. I heard a leak of air coming out of my throttle body ( I think it is the gasket). Anyway, have you heard of throttle gaskets leaking before? i can imagine that they do but I would just like to know if anyone else has experienced it before.
I did the leak test because I noticed i'm only pushing 13 psi instead of my norm of 15-16. thanks for any help! :dsm:
 
Patterson said:
Anyway, have you heard of throttle gaskets leaking before? i can imagine that they do but I would just like to know if anyone else has experienced it before.
Yep, mine did. Most people seal it up with a thin layer of RTV between the two surfaces. I prefered to order two real gaskets and seal it that way (one between the elbow and the throttle body, another between the throttle body and the intake manifold).

Also, if you have bad leaks, a bike pump might not have enough "umph" to find all of the leaks. If you take it to a shop with a regulated compressor, checking for leaks is much easier.
 
I pressurized the system with a bike pump
Like psychlow said, the bike pump isn't gonna do you any good. I love my $50 Walmart compressor. :)

I heard a leak of air coming out of my throttle body ( I think it is the gasket
Could be gasket, vacuum hoses, BISS o-ring or tb shaft seals.

I also suggest disconnecting the factory bcs and disabling pcv for the pressure test.
 
Yeah, they can leak. I use the high-temp RTV instead of gaskets on that. The throttle-body shaft seals can be leaking, too.

Using a bike pump is pretty rough. You can get a cheap-but-works 22-gallon compressor from Harbor Freight for $150. At the worst, getting an air tank from Walmart and filling it up at a gas station will give a couple minutes of 20psi. With how bad these cars fall on their face with even small leaks, I consider one or the other mandatory.
 
im a little late on this subject but im curious as to how you did the test? .. using a bike pump?
 
ok ... but how did you do it .. since thats what i was asking :thumb:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g 2G DSM ECU
    Came off a 1997 GST M/T. Stock ECU
    • Stizzydrew
    • Updated:
    • Expires
  • For sale 1g 90-91 Talon pass taillight.
    Pass taillight for 90-91 Talon. Good condition. No breaks or cracks. Will buff up nice...
    • Galant665
    • Updated:
  • For sale 2g 2G Manual Window Assemblies, Door Panels, & Hardware
    2G Manual Window Assemblies, Door Panels, & Hardware $250 + shipping and paypal feesYou must...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2GB Talon Wing ( 3rd brake light included )
    2GB Talon Wing $90* pick up only in 08096 NJ * 3rd brake light includedYou must be...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2GB Talon Front Bumper
    2GB Talon Front Bumper $200* pick up only in 08096 NJ * tear on the bottom side, picturedYou...
    • jersygsx
    • Updated:
    • Expires
Back
Top