The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

WTH p0300 still ?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

whiteboyz

10+ Year Contributor
244
0
Jul 21, 2009
Albany, New York
Ok this might not be the right place for this. So If it is not Mod's please move this to the correct place.

Ok so I have a 6bolt bottom with a 7bolt head, with the green top cas with the harness from RRE, I also have the box checked in link for non 95/96 cas. And yet I still get the dang p0300 random misfire. So I have to cycle my key for it to go away everytime.

I thought with the harness and the box checked in link that I would not get the random misfire ? Any suggestions on why this is still happening ?

Thanks.
 
Do you have the DTC box checked for the misfire?
 
At what RPM does it occur?

Most of the time on the highway in 4th / 5th gear or crusing around town in 4th not exactly sure on the rpm's . I can check tomorrow and see at what rpm's it does it at. But it is annoying as heck especcialy when I have my kids friends int he car.


I dont think it has done it in 1st gear

Do you have the DTC box checked for the misfire?

I did not at first, Then when the misfire was going on I was not able to check what was going on with my scanner, So I just checked the dtc for misfires in link so I could see if it was that and sure enough it was a p0300
 
I mean do you have the box checked for cylinder misfire. It's the second box, it should cure your problem.
You must be logged in to view this image or video.
 

Attachments

You must be registered for see attachments list
I mean do you have the box checked for cylinder misfire. It's the second box, it should cure your problem.
You must be logged in to view this image or video.

Yes I do. When it first started to missfire. I was unsure of why as i had that box unchecked and was not able to get a CEL, Even using my mac, matco, or old red brick scanner wasnt able to pull a code. So I checked that box and drove it and pop comes a p0300. And I still have it checked.

I will try unchecking it in the morning and driving it around and see how it goes.

I think you can see the box checked in my log, I dont have the code thrown in this 1 log though
 

Attachments

You must be registered for see attachments list
Last edited:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top