ECMlink Idle Log. Help Needed.

[P3Kans DSM]

Alright Im trying to teach myself to use Link by watching all the videos and looking at other peoples Logs. I am completely lost however. At idle I noticed my throttle was at 3%, TPSVolts at .65v, and idleswitch at 0. So i used the TPSadjust and that didnt work, so i manually adjusted it and got it to Throttle 0%, TPSVolts at .63v, and my Idleswitch at 1. Only problem now is my idle is all over the place. Any help to what i need to fix next is greatly appreciated.

 

[razrman8]

The best thing to do, is to get an idle log. Getting a log of just your idle will make it easier it easier to see if things are in line before you go cruising and trying to fix things. Make sure the car is at an operating temperature while performing the log, get a nice log of your idle, then go from there.

 

[P3Kans DSM]

Updated with 2 separate idle logs. Thanks for the Info Razrman8. Lets get this idle dialed in correctly.

Heres also a log of me Viewing my TPSVolts after adjustment. It never stays at .63v like its supposed to. Why is that?