The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Keydiver users! (knock gauge question)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

91tizzy

15+ Year Contributor
459
2
Jan 19, 2008
Cincinnati, Ohio
which marks on the stock boost gauge indicate more than 3 counts of knock when using jeff's chip?
 
I think if it goes up one line(-7vac) from where it sits on the bottom, that will be around 6-8cts
You should be able to get a round about figure comparing with your logger.
 
-7 vacuum is where it starts off with no knock. advanced my timing back to 5* last night and the car came alive but now with my boost creeping to 18psi it knocks to the 0 mark on the gauge at the top of third....possibly even went higher. Logger is currently dead so that is why im asking.
 
Got a quick response from jeff for anyone wanting to know the answer to this question.

Every notch on the stock boost gauge in the stock cluster indicates 5 counts of knock.

This doesnt correlate "exactly" to what my logger says on my car and with my ecu. You will have to see what it means in your car. When my gauge reaches 7psi i have approximately 8 counts of knock.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
Back
Top