First 3rd gear log with DSMLink

[rock0134]

I posted on the DSMLink forum with my first 3rd gear pull from 2k-6k. I know there are a lot more of you guys here with link and useful input that don't use that forum so I figured I'd post here.

I am just starting to learn and use link so Any advice on what to do and look at would be much appreciated. Thanks.

 

[1992awdlaser]

So you didn't do your idle or cruise tuning first? What amount of boost were you running?

 

[turbosax2]

Next time warm the car up before making the pull. Make sure your coolant temp is at least 180. Log MafRaw, ltft lo, ltft mid, and stft. You're going to want to get a wideband to properly tune. A map sensor is also useful. There's not too much I can tell you from that log. You're getting some minor knock but everything else looks ok. Your intake temps might be a little high - what was the ambient temperature when you took the log? What psi were you running?


Read all of these.
start [ECMTuning - wiki]
quickieafsetup [ECMTuning - wiki]
howfueltableajustmentsareapplied [ECMTuning - wiki]
http://www.dsmlink.com/DSMLinkV2.5 User's Guide.pdf
http://www.dsmtuners.com/forums/articles-tuning-ecu/91676-how-street-tune-using-dsmlink.html
http://jeffgst.com/

 

[rock0134]

All of that was logged.... It is at 15-16 psi and that temperature here is like 85 and humid as hell.

 

[1992awdlaser]

All of that was logged.... It is at 15-16 psi and that temperature here is like 85 and humid as hell.

None of what turbosax mentioned was logged. Open the log and hit ctrl+A and everything that was logged will show up. I agree with letting the car warm up first. Intake temp seems fine to me.


Why didn't you do the idle and cruise tuning first?