Logging With Palm Logger

[Chicken Patty]

Good day guys,

My buddy let me borrow his logger for a bit so I can use it on my car and get familiar with it. The logger works great and its a big help when tuning. However, it only seems to connect at no more than 3 samples per second. Is this normal? That i know off they are supposed to connect at at least five samples per second. Also, sometimes it'll just loose connection. What can cause this? Has anybody fixed this problem before? COuld the cable be the main suspect here?

 

[tbonitz301]

Ok its been a while, but if you havent done the byte packet test it could help. I dont even remember how to get to the screen. I just know that you run the byte packet for 2min then stop it,then run the inter packet for 2min.Now go up to the top of the screen, and turn both values up 5 clicks.Then hit ok.It should help. It helped me.As far as it disconnecting i would check the connection on both ends of the cable, and make sure your connection to the palm is good!

 

[Chicken Patty]

Ok its been a while, but if you havent done the byte packet test it could help. I dont even remember how to get to the screen. I just know that you run the byte packet for 2min then stop it,then run the inter packet for 2min.Now go up to the top of the screen, and turn bothe values up 5 clicks.Then hit ok.It should help. It helped me.As far as it disconnecting i would check the connection on both ends of the cable, and make sure your connection to the palm is good!

cool. I'll give that a shot later tonight and let you know how it went. Thanks man.

 

[tbonitz301]

Yea let me know how it goes

 

[Chicken Patty]

Yea let me know how it goes

hey man, I actually went and did that now. Its connecting at around 9 samples per second. THanks man, you are the man.

 

[tbonitz301]

No problem glad i could help

 

[Chicken Patty]

No problem glad i could help