2G Stage 3 EPROM chip for 95's

[jaders]

I recieved my chip that I ordered off ebay.And I read the instructions and they are not for my car.I am talking about the clutch sense wire. My ecu has four plugs not three like the 1gs.The instructions say to go to the smaller of the three plugs and cut a black wire. My small plug has a black with green wire.I went ahead and hooked it up anyway. I took my car out for a test drive.It ran like crap.It was hitting the same amount of boost but it was not reving up like normal.It was very slugish.So I stopped and disconnected the clutch wire.I might add that no trouble lights were coming on.So I tested it out again and I could just about put my car side ways in first and second.(I need some new tires)any way I could notice an increase in my cars power.Has any one hooked up one of tese chips in there 2gs.If so I could use some help here.I emailed mitsubishe specialties but it looks like the did copy the chip and instructions off tmo.And tmo's web site does not have instructions for the 2g clutch sense wire install. Thanks for any help.

 

[AWDTireSmokeTsi]

im on my 2nd EPROM chip for my 95 TSi and its running like shit...my boost gauge wone move, but it will read my A/f ratio....It will "studder" and 3000 rpm, but i have not installed the clutch wire...wtf??