Welcome to DSMtuners - The Talon, Laser, and Eclipse performance enthusiast resource
























Login


 Featured 
 Products 
 >>>>>> 
Go Back   DSMtuners > DSM Forums > General > Newbie Forum > Problem Diagnosis

Problem Diagnosis Can't figure out the problem? Does the question not fit in one of the other tech forums? New Members can post here.

Reply  
 
LinkBack Thread Tools
Old 06-25-2008, 09:40 PM   #1 (permalink)
New Member/Lurker
 
Car: 94 Galant ES 2.4L 16V SOHC
From: Malvern, Pennsylvania
Region: Tri State
Registered: Dec 2007
Posts: 7
Classifieds Rating: (0)
Reputation: okm12346 is more helpful than not
Vibration after AGX and Pro Kit

OK, I just installed the AGX and the pro kit. Everything went fine, no problems during the installation, but when I took it for a drive the entire body was vibrating. It happens from 2000 to about 2500 rpms, and after that it does it a little less to the point that it doesnt bother me. My guesses are that there is some wrong with the axles, or bad motor mounts. It seems to be some sort of rotational vibration


Has anyone experienced such a thing when lowered?

Help me out its very annoing!



Its set on 4. And it didnt do it with the GR2 and stock springs



I bought some cheap ebay 2g eclipse springs whe I first bought the car and I put them on my stock shocks, and it did the same thing, so I put back the stock springs on the next day and it was gone





Ok, I took it to the highway, it almost doent do it on right turn and does it alot on left turn



?
Offline  

[posts] Reply With Quote
Related Auctions

Sponsored Links
Old 06-25-2008, 09:45 PM   #2 (permalink)
Proven Member
 
From: Quincy, Illinois
Registered: Jan 2005
Posts: 635
Classifieds Rating: (0)
Reputation: Turbo Talon DL is more helpful than not
Quote:
Originally Posted by okm12346 View Post
OK, I just installed the AGX and the pro kit. Everything went fine, no problems during the installation, but when I took it for a drive the entire body was vibrating. It happens from 2000 to about 2500 rpms, and after that it does it a little less to the point that it doesnt bother me. My guesses are that there is some wrong with the axles, or bad motor mounts. It seems to be some sort of rotational vibration


Has anyone experienced such a thing when lowered?

Help me out its very annoing!



Its set on 4. And it didnt do it with the GR2 and stock springs



I bought some cheap ebay 2g eclipse springs whe I first bought the car and I put them on my stock shocks, and it did the same thing, so I put back the stock springs on the next day and it was gone





Ok, I took it to the highway, it almost doent do it on right turn and does it alot on left turn



?
Have you tried a front end alignment? Having one done on my car made it much more pleasant to drive.
Offline  

[posts] Reply With Quote
Old 06-26-2008, 12:38 PM   #3 (permalink)
New Member/Lurker
 
Car: 94 Galant ES 2.4L 16V SOHC
From: Malvern, Pennsylvania
Region: Tri State
Registered: Dec 2007
Posts: 7
Classifieds Rating: (0)
Reputation: okm12346 is more helpful than not
Quote:
Originally Posted by Turbo Talon DL View Post
Have you tried a front end alignment? Having one done on my car made it much more pleasant to drive.
Just did. Still there
Offline  

[posts] Reply With Quote
Old 06-26-2008, 05:30 PM   #4 (permalink)
Proven Member
 
From: Quincy, Illinois
Registered: Jan 2005
Posts: 635
Classifieds Rating: (0)
Reputation: Turbo Talon DL is more helpful than not
Quote:
Originally Posted by okm12346 View Post
Just did. Still there
Does it do it with the car on jackstands?
Offline  

[posts] Reply With Quote
Old 06-26-2008, 07:16 PM   #5 (permalink)
New Member/Lurker
 
Car: 94 Galant ES 2.4L 16V SOHC
From: Malvern, Pennsylvania
Region: Tri State
Registered: Dec 2007
Posts: 7
Classifieds Rating: (0)
Reputation: okm12346 is more helpful than not
now that i havent tried yet
Offline  

[posts] Reply With Quote
Old 06-26-2008, 11:13 PM   #6 (permalink)
Proven Member
 
From: Mesa, Arizona
Region: Southwest
Registered: Nov 2006
Posts: 73
Classifieds Rating: (0)
Reputation: KDub is an unknown
a wheel loose? lol happened to me =D you never know
Offline  

[posts] Reply With Quote
Reply






Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
eibach pro kit/kyb agx to bouncy.... what something smoother Jason84 Handling Tech 5 11-28-2005 08:35 PM
Camber Question on 1G w/ Pro-kit & AGX dustyduff Handling Tech 3 03-15-2005 11:37 AM
Eibach Pro Kit kyb adj shocks no camber kit? everglow Handling Tech 6 01-30-2005 11:54 PM
kyb agx or tokico illumina w/ eibach pro kit PsSsShTGSX Handling Tech 11 09-05-2004 04:12 PM
Poll: Shock/spring combos, KYB AGX + Eibach Pro.... aovsi Handling Tech 0 07-02-2003 12:16 AM


All times are GMT -7. The time now is 12:19 AM.

Page generated in 0.14480710 seconds (77.26% PHP - 22.74% MySQL) with 10 queries
DSM Forums | Pontiac Solstice/Saturn Sky Forums | Evolution Forums | WRX Forums

© 2001-2008 SPEEDtuners Network, LLC All Rights Reserved

LinkBacks Enabled by vBSEO 3.1.0