dsmmayhem
Probationary Member
- 11
- 0
- Jun 20, 2006
-
Baton Rouge,
Louisiana
I bought my 93 non-turbo for 100$, it snapped a timing belt, so i bought a new head, turns out that head was warped so I got it shaved, they shaved it down far enough to where it scraped the valves. I got the head on, timed it, replaced all the gaskets, water pump, plugs, wires all that stuff.
When I went to start it, it was blowing compression out of the tb, so I checked the firing order, it was wrong, so i fixed that, then adjusted the cas because it was 180 off. It no longer blows compression out of the tb but it just wont start. I've got good spark, and its getting fuel, but im getting constant power to my injectors so i'm not sure if its flooding it or what.
any help is appreciated
When I went to start it, it was blowing compression out of the tb, so I checked the firing order, it was wrong, so i fixed that, then adjusted the cas because it was 180 off. It no longer blows compression out of the tb but it just wont start. I've got good spark, and its getting fuel, but im getting constant power to my injectors so i'm not sure if its flooding it or what.
any help is appreciated
