The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

oil water cooler

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dtab123

15+ Year Contributor
70
3
Jan 21, 2005
mena, Arkansas
here's my dilemma i just finished a 6 bolt swap my donor car was a 92, it has a water cooled oil filter housing after i hooked up the turbo water lines i don't have any for the oil housing the only open port i have left is for the over flow does the water lines come from anywhere else besides the thermostat housing. any advice or other methods would be very helpful thanks
 
Dtab123 said:
here's my dilemma i just finished a 6 bolt swap my donor car was a 92, it has a water cooled oil filter housing after i hooked up the turbo water lines i don't have any for the oil housing the only open port i have left is for the over flow does the water lines come from anywhere else besides the thermostat housing. any advice or other methods would be very helpful thanks

Before you did the swap, did the car have an air to oil cooler or was it water cooled too?
 
I have run my car with the oil/water cooler on the car but unplugged for a few months and there was no increase in oil temps..(according to greddy gauge)
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top