Help me identify this exhaust

[dope96clipse]

i need to find out if this exhaust is for a 2g or 1g, i know its a eclipse exhaust but need to see if anyone knows for sure, cuz if its for 1g or 2g i have ppl who want it...thanks

 

[olmytsi]

It looks like a 1g because of the curve.

 

[dope96clipse]

im thinking the same thing, i drove to my brothers house after my class last nite to drop off the pipe and looked at his 91gst and it does look like it would work for that, but it looks simular to my friends 96gst as well.. any one else have an idea>? and is that section swapable between gst's?

 

[olmytsi]

Its not hard...
1g exhausts come out the right side (passenger).
2g exhausts come out the left side (driver).

Another way to check is if the exhaust has a hole for an o2 sensor on it...only 2gs have a rear o2 sensor. 1gs have only 1 o2 sensor at the turbo.

ps: you can look at he hangers. They can only be hooked up to the rubber hangers on the car one way. So sit the exhaust on the floor and have the hangers on top where they should be and look where the curve goes: right= 1g, left= 2g.

I hope i didn't confuse you.

Good luck

 

[TimG]

It kind of resembles my old exhaust on my TSi FWD. But it's impossible to know without mocking it up.

 

[dope96clipse]

Its not hard...
1g exhausts come out the right side (passenger).
2g exhausts come out the left side (driver).

Another way to check is if the exhaust has a hole for an o2 sensor on it...only 2gs have a rear o2 sensor. 1gs have only 1 o2 sensor at the turbo.

ps: you can look at he hangers. They can only be hooked up to the rubber hangers on the car one way. So sit the exhaust on the floor and have the hangers on top where they should be and look where the curve goes: right= 1g, left= 2g.

I hope i didn't confuse you.

Good luck

naw u dint confuse me i totally forgot about the second o2, it does have one, BUT my buddies 96 gst hast the same layout as my brothers 91, thats why i was confused, but now i kno its 2g. thanks

 

[olmytsi]

No problem man, I'm glad i could help out.