The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Running extremely lean

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

playitlouddsm

15+ Year Contributor
377
16
Jun 16, 2004
Lawrence, Kansas
Ok well while driving today i noticed that on dsmlink it said i had an a/f ratio of 18.00. I have all my fuel setting zeroed out, so i'm not quite sure why it's running so lean. Also my O2 reading on dsmlink is saying that its 1.10V WTF I thought that the higher o2 voltage reading ment that i was running rich, but then the a/f ratio is telling me i'm running crazy lean. Anybody have a clue what might be going on?
Thanks -Nick
 
This is happening at all times. O2 is always at 1.1 v and a/f is always reading 18. Could my O2 sensor be shot?
 
Alright after a normal drive tonight i noticed that while logging my A/F ratio would richen up every time i shift, but then go straight back to 18. Along with the a/f spiking everytime i shift i also log about .4-.7 counts of knock at the same time too. My o2's don't move from 1.1v at any time. Any ideas?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top