Chirp When Press Clutch?

[pecka]

Ok I recently took my car to the track, and after I was done on the way home I noticed a chirp had developed when I press and release the clutch quick, it doesent do it all the time though. The car also shakes a little when I dont rev it too high when I take off. I know I need a new clutch because mine has burned a few times and I just want to make sure the chirp and shake are from that. Thanks

 

[luv2rallye]

Shake = clutch, chirp = throwout bearing. Replace both.

 

[pecka]

ok thats what I was leaning too, is a act 2100 a good choice for a mostly stock 2g awd? i dont plan on going too big with it. If I go with a 2600 will that increase the chances of crankwalk?

 

[2gGSX]

In a word, yes.

Edit--the 2100 would be fine for a lightly modified car, although you'll have to read some more to get peoples' opinions on ACT as of late.

 

[93greentsi]

ACT still makes good clutches IF installed properly. Make sure you use a mitsubishi throwout bearing NOT the ACT one that comes with the kit. If you are doing it yourself make sure the flywheel has a proper step as well. If you take it to a shop make sure its a DSM shop and/or the mechanic really knows his stuff.