FP rewire for AWD

[dsm4life]

K i got this link http://www.raktron.com/fuel/rewire1.html

but as the site says it might be different for a AWD . Why is that ? Is there anything that i should be ready for ? Im going to try and get this done thur and i also like to have a step by step just in case i get into any trouble. Thanks guys

p.s
i did try searching also.

 

[philipkrotch]

it looks different. go to www.vfaq.com they have several different desriptions on hoe to wire it for 1g AWD.

 

[dsm4life]

is a 1g AWD the same as 2G AWD ?

 

[philipkrotch]

it should have em for a 2g on there. a 2g FWD is the same as a 2g AWD

 

[bosljeff]

Well, unless Mistsu used different wires and colors from fwd to awd, you would think it would all be the same. The only difference I can see is from generation to generation, awd/fwd shouldn't matter, but what do I know?

 

[dsm4life]

Well, unless Mistsu used different wires and colors from fwd to awd, you would think it would all be the same. The only difference I can see is from generation to generation, awd/fwd shouldn't matter, but what do I know?

by my post what do i know ?

well i wouldnt think that there would be a difference but i wanted to be ready for it. When something seems too easy it always turns into a project. Every DSMer knows that , . Like for example i went to radio shack with my little shopping list a manager greeted me as soon as i got there , took the list from me and got me everything in a matter of mins. Now for every good there is a bad (the bad comes tomorrow when i attempt the job)

thanks for post guys

 

[philipkrotch]

Well, unless Mistsu used different wires and colors from fwd to awd, you would think it would all be the same. The only difference I can see is from generation to generation, awd/fwd shouldn't matter, but what do I know?

AWD and FWD is different on a 1g..well mine was, but its a 90.

 

[dsm4life]

also to add to that last post of mine the BCS also has to be disconnect as well right. Im a double check whore , i know . (stupid dsm trying to make me a mechanic )

 

[Todd95TSi]

The only difference between 2g FWD and 2g AWD is that AWD has a few extra wires for the gauge/light sending units. Use the vfaq that you found and ignore the extra wires on your car. (BTW all wire colors are the same)

 

[dsm4life]

The only difference between 2g FWD and 2g AWD is that AWD has a few extra wires for the gauge/light sending units. Use the vfaq that you found and ignore the extra wires on your car. (BTW all wire colors are the same)

thank you i did the rewire today and car is running whoohoo. There are extra yellow wires that i did ignore like you said. Also different is we dont have a blue wire (meaning solid) its a black wire , spotted blue. That was only change. Over all not a hard job. thanks guys.