Devils Own yellow fault light flickers at wot

[Hiitman]

I thought this was causing my knock problem but that just turned out to be a leak at my egr block off plate. The car runs great but my fault light on the controller will randomly flash at wot. I haven't checked to see if I tightened the nozzle too much but I imagine if I did I wouldn't be flowing the needed amount of meth thus causing knock. Has anybody ever experienced the same problem?

 

[Hiitman]

Anybody? Chance? I tried loosening the nozzle. Still nothing. Should I turn the pressure down.

 

[Hiitman]

I guess reading the Devils Own forum would help. Got this off one of the posts if anyone else was wondering.

the yellow light has 2 uses. It will light up steady when above 95% or higher of the max adjusment of boost. If its flickering under boost then you should probley have it adjust a tad lower boost level.

Yes, if its just sits there and blinks then its an error. This will only go away by removing power and fixing the error

 

[Devilsown]

Yea you have the max knob adjusted to slightly above your max boost. When the boost drops down to 95% of where the knob it adjusted thats why it is blinking.