need help in the engines front area

[LTUDSM]

i want to knoiw,white size of bolt is good for a balanceshaft tensioner pulley's place,because i put a BSEK and i need a shorter bolt.

You must be logged in to view this image or video.

and the other thing is described in the picture

You must be logged in to view this image or video.

Thanks for any help

 

[93_tsi_fwd]

12mm should do.

 

[LTUDSM]

i need more help on that again ( i need to know,which bolts are going to water pump,and the bracket,where t-belt tensioner sits ,and the bracket where idler pulley is ,actually i need someone to guide me through that,if someone could do,it would be awesome...... Thanks

 

[LTUDSM]

Can you guys check out my engine's front part from this pic.I want to make sure,that everything is in a right place,before i put a t-belt and the t-belt cover... Thanks....

You must be logged in to view this image or video.

 

[wondabread]

If you mean are all the marks lined up...it's impossible to see in your pic. There is a great place to make sure you haven't missed anything

http://www.vfaq.com

Click DSM. Under the engine heading - Tom Stangl has just about every T-belt picture you could want.

 

[LTUDSM]

noo not the t-marks,but all the parts in a front of the engine,i want to make sure ,that im not missing anything,before ill put the t-belt .

 

[wondabread]

This is what it is supposed to look like. When venturing into new territory with your car, a digital camera can save you lots of time and a ton of money. This pic was on the website I linked you above.

You must be logged in to view this image or video.

Good luck

 

[LTUDSM]

after spending half day at the junk yard,and looking at the engine and all those parts,figured out the problem,so i put everything vack in 3 hours,so the engine is ready to be droped in the car next weekend
some of the completely rebuilt engine pic

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[RoasT BeeF]

Can you guys check out my engine's front part from this pic.I want to make sure,that everything is in a right place,before i put a t-belt and the t-belt cover... Thanks....

You must be logged in to view this image or video.

I hope you compressed that hydrualic tensioner before you put the timing belt on.

 

[wondabread]

I noticed that too.

 

[LTUDSM]

i did, like the book said,compressed the tensioner,put the allen wrench in it,aligned all the marks,put the timing belt on,toook that allen wrench out of the tensioner

 

[RoasT BeeF]

Good deal!