The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Intercooler hose

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1badgstdude

Probationary Member
24
0
Feb 21, 2008
Long Beach, California
This is my situation....I just bought the evo III turbo. After about 3 hours of installation. I find that the install kit for the 2g only comes with a j pipe. I had a hard pipe coming from my t28 to the sidemount. Because its hard, and the way the j pipe comes off. It doesn't work. So I think I have to find a stock lower ic pipe. Also I have on order a greddy front mount ic. and the greddy upper and lower piping. I'm wondering am I going to have the same problem but worse. Any suggestions? Please help.
 
It's kind of hard to picture what you're trying to say. Are you saying that the J-pipe faces downward, whereas your intercooler hose requires a 90 degree turn? If that's the case, you can just go for a 90 degree coupler. The Greddy Kit goes to stock location, so if you need this coupler with stock parts, you will also need it with the Greddy kit.
 
Right now the J Pipe faces down. I need a 90" pipe to go to the side mount. I ordered the greddy FMIC and lower and upper piping. Is the frount mount piping going to go to the jpipe or Will it replace the jpipe and go straight to the turbo? Can I find that 90" coupler at a local store or will i have to order?
 
You will still need the 90* coupler since the greddy kit would need to line up with the t25/28 turbos.
 
Just buy a 90deg coupler. If you have a hard time finding it locally and don't want to order one online you can try radiator hose with a 90deg bend, but some people think this is too ghetto LOL. It works fine for me though :)
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top