The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

avid billet mounts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

d1prospect

20+ Year Contributor
406
62
Mar 14, 2004
Glen Bunie, Maryland
has anyone heard of the billet mounts causing knock?
i was told not to buy because they may cause a phantom because of the increased vibration from being so stiff. your opinions would be greatly appreciated. thx
 
no knock here. If anything i could see them reducing phantom knock atleast in my case because my lower mounts werent even there. look up my avid motor mount install.
 
If it's a big issue, they offer three different levels of stiffness. I believe they're 62A, 75A, and 90A. I had Prothanes and solid delrins in my old car and that thing shook something fierce at idle but at anything over 5mph there were no shakes. Also, I think Prothane are rated somewhere around 80A, but don't quote me on that. I personally picked up a set of the Avid mounts in the 62A since mine is a DD. I'll report back once they're installed.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Latest Classifieds

  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
Back
Top