Need to Get an Alignment - Nobody will do it. Where to GO!!

[SpyderGS98]

HELP!!!

I just got the Pro-Kit and 17" on my Eclipse Spyder.
(On the Spyder it's lowered 1.6" but really more like 1.8" - I can only get two fingers betweent the tire and fender).

Nobody will do it (The Alignment that is). I need to get an alignment ASAP. I have a new set of Kumho Ecsta Supra 712 225/45/17 on 5-Zigen Fireball in Hyper-Black.

I also have the Eibach Rear Camber Kit Install (Set at about +1.00 degree) Their Adjustable form -.75 to +2.00 degree's

Where did everyone else take theirs to get it done. Firestone, Midas, NTB won't even touch it.

Thanks,
Mike
98 Eclipse Spyder GS:

 

[gstspyder1998]

I would try to go to a shop that specializes on suspension.

 

[Awdboost]

I hate when shops do that. Try the dealership. They may be expensive but they might do it.

 

[2-0turbo]

Do you do your own work? Do you have access or own a garage with a pretty flat concrete floor? You can do a pretty good alignment with tape measures, strings, and a carpenters square. Using a carpenter square to set my rear camber on my car, I was shooting for -1.0 on the rear. I went and had it aligned and the "computer" said -0.9 degrees. Pretty damn good. Although, I neglected to check front toe and it was toed in 1/2" per side! I only lowered my front 1/4" and it greatly effected my toe.

 

[dsmnate]

If you have a Goodyear nearby you could try then. Otherwise keep looking for anywhere that sells tires should have an alignment rack and as long as they can get your car on it I don't see why they wouldn't do it.

 

[GSTspeedracer]

I also have the Eibach Rear Camber Kit Install (Set at about +1.00 degree) Their Adjustable form -.75 to +2.00 degree's

I'm now searching for an alignment kit! how is the Eibach installed? I looked at the pic's on tire rack and it looks like the type were have to cut the upper control arm, is this correct? Please let me know? I'm at a loss on which type to purchase.