The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

SS Brake lines on rear necessary?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

matt97gst

20+ Year Contributor
178
1
Oct 9, 2002
Yes or No? I got the baer kit for the front along with new rotors for the rear. Do I need to get SS brake lines for the rear since I will have them on the front?
ps. If I have fairly new brake pads right now on the car is it possible to use them on the new rotors I will be installing or should I get new pads?
 
The primary reason for upgrading to SS lines is take some flex out of the system, thereby improving response and pedal feel. Replacing half of the rubber lines should be an improvement. If you like the new feel, but want even more, go ahead and replace the rears too.
 
IMMORTALSPYDER said:
It's recommended to change out the rear, but it's not absolutely necessary.
By the same token, you don't need the fronts either then. :)

The primary reason for upgrading to SS lines is take some flex out of the system, thereby improving response and pedal feel. Replacing half of the rubber lines should be an improvement. If you like the new feel, but want even more, go ahead and replace the rears too.
:thumb: I have never seen them sold separately anyway.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top