Camber Kit? Or just alignment

[OneFastGST]

I have just lowered my car 2 inches with the goldline lowering kit. and a few of my friends told me that i need some sort of camber kit. is that true? why do i need that? can't i just get it alighted? please help !!

 

[daswerve]

I just dropped mine 2" as well, 'bout a week ago......before you buy camber kits, go get a front/rear alignment done first. If your camber is off, they won't be able to align the car yet, BUT they WILL be able to tell you how far off the camber is (in degrees) and probably won't charge you a dime to do so (I wasn't charged, anyway)......camber kits come in various correction sizes, meaning some may only correct up to +1 degree, while others can go all the way to +3.75 degrees. FYI: the more correction ya need, the more expensive they are, too. I needed to get +2 for the front and +3 for the rear. But, I have a Spyder, and they are heavier in the rear due to all the soft-top hardware, so hopefully ya won't be that bad with a GS-T.

Go get the alignments ASAP. Try not to drive the car too much until ya do, or you will eat your tires..... Hope this helps, and good luck!

 

[OneFastGST]

thank you soo much for all the help !!!
i appreciate it !

 

[daswerve]

My pleasure....hope it worx out for ya...

 

[Supercharged]

Your cars not fast!!!!!

Poooousy...

Whatee doo Cody
Hows your car riding with the springs


I'll holla

Peace
Steven

 

[OneFastGST]

Man i wish i had a Pontiac GTP .. they are soo fast.. especially with a cam.. that isnt installed .. man i wish i had one. especially since i've
beaten 3 of them .. hmmmm damn



peace steven
-TB34-

 

[Supercharged]

Originally posted by OneFastGST
especially since i've beaten 3 of them .. hmmmm damn

-TB34-

Yea right!!! Sure


You wanna pay $600 for my cam install poor boy.....

Man,, I never seen a pimped out eclispe before,,there so rare...
Especially ones with a drop and stock rims......whoa thats something you dont see everyday...


Atleast im still repersenting SicRides!!!

CAKE!!!

 

[daswerve]

OneFastGST, how'd everything turn out for ya?

 

[OneFastGST]

it worked out ok.. i got my stuff aligned.. and my camber is a little off.

thanks for all tha help man.

 

[daswerve]

No question......enjoy it, my man. I KNOW u r lookin' GOOD! How far ya off?

 

[OneFastGST]

i believe he said .7 that sound right?

 

[OneFastGST]

tell me if you can make anything from this.. this is what the mechanic wrote down for me

front / pass
----------------------------------------------------------------
needs to be -0.3 needs to be -0.3

it is now at -1.1 it is now at -1.7


can you make anything from that ?

plz help !

 

[dont need 8]

There is a free (inexpensive) rear camber mod you can do. It is good for 1 degree, that would make your rear at -.7 which is close enough to be in specs. I am not sure if links to other sites is allowed, I am sure the admins will smack me if they need to but here is the link:

http://www.2gnt.com/www/files/rearcamber.htm

It is from the www.2gnt.com web site.

I was unable to find this infor on dsmtuners, if it is here please direct this person to that link if links to other sites is frowned upon.