Stuff needed for Dec 8th

carslinger · 11-29-2007, 11:45 AM

Well..... It looks like my Aem ems may not be here till next mon and I am not sure if the car will be ready to run. With that being said I may end up being on the support team for you guys rather than running my own car. I am mostly set up for the 1g car for tunning etc...but I will try to help all of you there running get your cars strait....( if you need help). Lets get a roll call on who is going and what if anything they would like to achieve on the track so I can try to be prepared with tools etc......I have a laptop and logger available using Tmo if you are a 1g with stock ecu.

I look forward to another good showing..........

Corey

DSM_PWR · 11-30-2007, 07:13 AM

Well... i was gunna tune my safcII when i drop my evo III 16g

in but if you can help me tune it so i can get a good before & after time, that would help

carslinger · 11-30-2007, 08:12 AM

Quote:

Originally Posted by DSM_PWR

Well... i was gunna tune my safcII when i drop my evo III 16g

in but if you can help me tune it so i can get a good before & after time, that would help

Afc is easy......What do you have for mods? Egt gauge?Logger?

hdoerr · 11-30-2007, 09:00 AM

I have 2X6's in my car in case the flat bed gets called

DSM_PWR · 11-30-2007, 09:04 AM

Just whats on my profile... i was gunna have "Protech" dyno/tune it when i drop in the turbo w/650cc injectors since it wont really make toooo much of a difference right now. but if you could help show me how to tune it now i guess it wouldnt hurt.

carslinger · 11-30-2007, 09:56 AM

Quote:

Originally Posted by DSM_PWR

Just whats on my profile... i was gunna have "Protech" dyno/tune it when i drop in the turbo w/650cc injectors since it wont really make toooo much of a difference right now. but if you could help show me how to tune it now i guess it wouldnt hurt.

We can do that.....

carslinger · 11-30-2007, 09:57 AM

Quote:

Originally Posted by hdoerr

I have 2X6's in my car in case the flat bed gets called

2x6's are for beating in the windshield when it breaks......

DSM_PWR · 11-30-2007, 10:19 AM

Arite cool, well since your not that far from me let me know when you wanna do it

hdoerr · 11-30-2007, 10:53 AM

Oh Oh I want to play when you all tune DSM PWR car. I could be the base line for what you don't want the results to be.

carslinger · 11-30-2007, 10:58 AM

Quote:

Originally Posted by hdoerr

Oh Oh I want to play when you all tune DSM PWR car. I could be the base line for what you don't want the results to be.

Crybaby......

Don't worry yours will be done up very soon

The question is.........How's your driver mod?

hdoerr · 11-30-2007, 11:08 AM

DSM_PWR · 11-30-2007, 12:23 PM

you going to run hdoerr? or u still breakin in the tranny?

hdoerr · 11-30-2007, 02:06 PM

So that I don't sound like liar here is my sit. rep. The car is getting the B/C, Wideband O2, and EGT gauges installed as we speak. The Aluminum radiator and 910CFM puller are part of the work being done. Here is the problem, the center support bearings are really bad and won't hold up to any launches, the bearings are on order and should, I repeat, should be replaced by the middle of next week. I have an APEXI 3" turbo back being installed early next week as well so if all goes well then yes I am running but if the shaft isn't up to it I just won't take the risk. I just placed an order from Dejon Powerhouse for their upper and lower 2.5 inch I/C pipes flanges for the HKS SS blow off valve. I am going to re-circulate of course but that mod is a X-mas present and won't be on the car until then. Blah Blah Blah...I know

carslinger · 11-30-2007, 03:08 PM

Quote:

Originally Posted by hdoerr

So that I don't sound like liar here is my sit. rep. The car is getting the B/C, Wideband O2, and EGT gauges installed as we speak. The Aluminum radiator and 910CFM puller are part of the work being done. Here is the problem, the center support bearings are really bad and won't hold up to any launches, the bearings are on order and should, I repeat, should be replaced by the middle of next week. I have an APEXI 3" turbo back being installed early next week as well so if all goes well then yes I am running but if the shaft isn't up to it I just won't take the risk. I just placed an order from Dejon Powerhouse for their upper and lower 2.5 inch I/C pipes flanges for the HKS SS blow off valve. I am going to re-circulate of course but that mod is a X-mas present and won't be on the car until then. Blah Blah Blah...I know

Now all we have to do is to upgrade your driver mod to ME and were in the 10's for sure

hdoerr · 11-30-2007, 04:20 PM

10 minutes?

carslinger · 11-30-2007, 04:31 PM

Quote:

Originally Posted by hdoerr

10 minutes?

I guess you know your car better than I do.........

hdoerr · 11-30-2007, 04:54 PM

Correct I do and I know that if my car was capable of 10's it would have a rocket mounted somewhere.

carslinger · 11-30-2007, 05:41 PM

Quote:

Originally Posted by hdoerr

Correct I do and I know that if my car was capable of 10's it would have a rocket mounted somewhere.

Well the heading on the thread is "Stuff needed of Dec 8th", So in your case it looks like the answer would be:

Rocket....

1stGenTSi · 12-05-2007, 01:48 PM

Whats going on on the 8th?

Jdiddy2k4 · 12-05-2007, 02:47 PM

Some of the members will be meeting up in various cities such as Austin, San Marcos and then San Antonio, and then we are all heading to the san antonio raceway

1stGenTSi · 12-05-2007, 02:55 PM

Cool, where are people meeting in Austin? I'm up for it, hopefully if I get it tuned my car will be up for SAR too.