eXploitedGST
20+ Year Contributor
- 289
- 0
- Jul 27, 2002
Alright... awhile back... (like 4 months ago) i pulled my transmission out of my 91 awd.... and when i put it back together and started it the bellhousing had the most aweful sound come out of it and the clutch wouldnt disengage.... finially i got around to pulling out the transmission agian just yesterday... and after looking at it i still see nothing wrong! the only thing i questioned was when the had the pressure plate tightened down the diaphram springs were not sticking up at all.. there were already flattened down and i thought they had to stick up a little when the clutch was engaged... any ideas or what might be the problem here? o yea... my bellhousing thats on there was cracked from top to bottom then welded shut before i got the car.... would that affect anything like this?
well i have a similar problem my clutch is always engaged and well im pretty sure its the pressure plate so im just going to pu tina new clutch setup and see what happens...Im just going to start rreplacing things until it works
