The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Stuck in 3rd gear on hard shifts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blackGSX2g

DSM Wiseman
3,334
88
Apr 30, 2004
Kalamazoo, Michigan
Alright, my car got stuck in 3rd gear last time at the track. It happens anytime I push it with any speed/force into 3rd gear. I can get it to get stuck either at a standstill, or whn driving. It requires me to pop the hood and pry out the shift lever so it pops out of gear again, and if I pull back hard enough on the gear shift I can do it from inside the car. It feels like it is being over extended somehow.

TRE tranny with 2k miles
B&M short shifter @ 50% reduction with maybe 6k

Anyone else have this problem?
 
either the shift fork is damaged or the 3/4 hub is worn. Either way you will need to open the trans and inspect each for damage. I have rebuilt a few transmissions where the slider is worn so much that the teeth on the slider dont slide past the hub and dont allow you to shift out of the gear.
 
Yea I was afraid of that. I adjusted the shifter cables under the hood and it hasn't been doing it anymore, but I guess I'll have to tear it down and see. Shifts smooth as butter so I hate to take the damn thing off, but its still under warrenty at TRE so I'm not out much.
 
When it's the slider that's worn it may not do it all the time. In the cases that i have seen it only happens every once in a while.
 
Ahh, well it sounds like thats the problem then. Any ideas as to what would cause that with so few miles on it? Thanks for the help.
 
it wears where it meets the gear. This is usually due to missing shifts, a draging clutch or any thing that drags the slider on the gear.
 
Not sure if you got upgraded forks in yours, but where it breaks on the fork it just does not look like it is meant to be beat on (stock fork)
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top