1G What FWD CV Axles interchange

[TMCRacing]

I want to know what year axles will interchange with a 90 turbo 5spd FWD? I have some from a 93 AT FWD, will they work? The parts store are all over on the fit issue.

 

[DarthBulk]

I would call and ask these guys:

http://www.raxles.com/

They really know their stuff when it comes to DSM axles. They were very helpful to me, when I ordered my axles from them.

 

[hewhoisknot]

Yes they will fit. The only axle that is different is the driver side axle on fwd and awd cars. Other then that if they r the same wheel drive they should fit.

 

[92awddsm]

I want to know what year axles will interchange with a 90 turbo 5spd FWD? I have some from a 93 AT FWD, will they work? The parts store are all over on the fit issue.

The auto tranny axles wont fit. You need axles for a 5 spd.

 

[a73_4g67]

Yes they will fit. The only axle that is different is the driver side axle on fwd and awd cars. Other then that if they r the same wheel drive they should fit.

Can I use the right side AWD axle on the left side since both axles have equal length.

 

[RoasT BeeF]

Can I use the right side AWD axle on the left side since both axles have equal length.

No. The pass side axle has two male ends. The driver side has 1 male, 1 female.

 

[a73_4g67]

No. The pass side axle has two male ends. The driver side has 1 male, 1 female.

Ok, what I only want is the axle. I can remove the inner joints and outer joints and just get the axle since I already have the inner joints of an existing AWD axle set. I'm thinking both axles have the same length. Are the axles interchangeable without the inner and outer joints?

 

[power=dsm]

from what i remember All 90-94 axles are 25 splines EXCEPT for TURBO FWD 92.5-94 AXLES WHICH ARE 27 splines.

 

[a73_4g67]

from what i remember All 90-94 axles are 25 splines EXCEPT for TURBO FWD 92.5-94 AXLES WHICH ARE 27 splines.

yes, mine has 25 splines outer and 30 splines inner. I'm using a GVR-4 engine. I haven't inspected the right side yet, but I have a feeling that you can interchange the axles and just use the original joints.