The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Need help gears grinding

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

quiksilver38

15+ Year Contributor
457
1
May 4, 2004
East Bay Area, California
i got a 99 gsx and my 1st gear wont syncronize unless im from a stop otherwise its grinds and i hav to be really nice to the tranny to put it in second and 5th otherwise it grinds. i think the tranny fluid might be low but i dont know were or how to check it and i hear its hard to do? :confused: the cars got 78xxx miles on it. i remember on my 95gs i could slam the gears all day long and nothign bad would happen and that thing had 170xxx on it
 
u know i have the SAME exact problem but i can slide it into first if im pressing on the break like im going to a complete stop with the car not going any faster than 20 mph.

My buddy who has a 97 GSX, had the same problem and replaced his clutch and put different bushings in, and it fixed the problem.

I will be replacing my clutch this weekend, probably by sunday i can pm you and let you know if replacing my clutch fixed this problem. My clutch is bad, so this just kinda fits into seeing if this will help.
 
tonygst said:
u know i have the SAME exact problem but i can slide it into first if im pressing on the break like im going to a complete stop with the car not going any faster than 20 mph.

My buddy who has a 97 GSX, had the same problem and replaced his clutch and put different bushings in, and it fixed the problem.

I will be replacing my clutch this weekend, probably by sunday i can pm you and let you know if replacing my clutch fixed this problem. My clutch is bad, so this just kinda fits into seeing if this will help.
yeah this dsmer from work said replacing the clutch ball and fork fixed his problem buthes got a GST. also i still would liek to know were to find the place to put the tranny fluid in
 
Gear grinding is a synchro problem. Possible worn synchros or wrong fluid? Bad clutch is plausable but most bad clutches either won't let you put it in gear at all as the tob won't engage the fingers well enough or slips under acceleration Old 1g's are world famous about synchros. Not all that hard to replace if you ever been in a trans but if you haven't been inside I woudn't do it unless some one who knows is helping.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
  • For sale 2g Eclipse/Talon Passenger Side Fenders
    95-99 Eclipse/Talon Passenger Side Fenders
    • Sdcryan1
    • Updated:
    • Expires
  • Wanted Driver Side Front Side Skirt End for 97-99
    Looking for the driver side skirt end molding. Bonus if it has the mud/rock guard.
    • ProjectDSM
    • Updated:
    • Expires
  • For sale 1997 Eagle talon esi
    runs and drives located in Oklahoma City
    • Nii
    • Updated:
    • Expires
  • For sale 2 bare 7 bolt motors
    bare 7 bolt bottom ends
    • Nii
    • Updated:
    • Expires
Back
Top