Problems w/ my torque converter

[6 bolt swaper]

I swaped in a 6 bolt 4g67 from a 7 bolt 4g63 and the knob on then end of the TC does not match the crank so it moves around in there and busted my tranny seal. I can replace the seal no problem but I don't want to keep doing it. I ran it about 1000 mi. before it busted. So do ya think I need a new TC or can I just have a shim made???

 

[tommyboy]

put in a real 6 bolt

 

[6 bolt swaper]

what up punk beotch??? Long time no see. I'll be puttin' the real thing in later, but for now I just want it to work!

 

[transdude]

I swaped in a 6 bolt 4g67 from a 7 bolt 4g63 and the knob on then end of the TC does not match the crank so it moves around in there and busted my tranny seal. I can replace the seal no problem but I don't want to keep doing it. I ran it about 1000 mi. before it busted. So do ya think I need a new TC or can I just have a shim made???

There is a whole kit involved for doing this swap.
http://dsmtuners.com/forums/showthread.php?t=156337

You should post these types of questions in the A/T forum here so I will see them.

-John